NauticProfile®
S
mounting profiles
NauticProfil® S1 – The delicate classic for continuous light lines
The NauticProfil® S1 is a delicate aluminum profile for creating continuous LED light lines. Combined with the NP luminaire insert, it forms a slim linear light with a clean design and decorative side surfaces. Its compact construction makes the profile suitable for a wide range of applications in architectural, office, and commercial buildings, as well as in high-end interior design.
The profile can be used as a surface-mounted profile on walls and ceilings or as a pendant profile. Furthermore, it can be discreetly integrated into furniture, handrails, and custom interior fittings, thus opening up numerous possibilities for linear lighting concepts.
For easy and precise installation, the NauticProfil® S1 features integrated mounting holes on a 150 mm grid. An additional centering line facilitates re-drilling and
supports a quick and clean installation.
Depending on the requirements, various covers and lenses are available. This allows the light distribution to be specifically adapted to the respective project – from homogeneous
general lighting to precise accent lighting.
With its slim geometry, flexible mounting options and diverse light control options, the NauticProfil® S1 offers architects and lighting designers a
versatile solution for delicate linear lighting and continuous lines of light.
Dimensions:
End plate:
Assembly:
The NauticProfil® S1 can be screwed to the wall/ceiling or suspended using various mounting accessories.
Please also refer to our form for NauticProfil® corner configurations. Special corner solutions for all profiles and LED inserts are available with light emission inwards, outwards, upwards and downwards.
Covers / Lenses
CR
CS
(Cover Square)
22 x 26.1 mm
CS
(Cover Flat
22 x 20.2 mm
CS
(Lens 90°)
22 x 24.1 mm
CS
(Lens 60°)
22 x 26.2 mm
CS
(Lens 30°)
22 x 26.7 mm
CS
(Lens 15°)
22 x 30.1 mm
CS
(Lens Asymmetric)
22 x 30.0 mm
CS
(Cover Square Blind)
22 x 26.1 mm
CS
(Cover Flat Blind)
22 x 20.3 mm
* The height specification describes the light fixture insert with the selected cover, including NauticProfil® S1
NauticProfil® S2: Narrow mounting profile for precise object and facade lighting
The NauticProfil® S2 is based on the proven geometry of the NauticProfil® S1 and extends it with an integrated receptacle for mounting clips and accessories. This makes the aluminum profile particularly suitable for applications where precise alignment of the light line is required.
With straight or angled mounting clips, the profile can be flexibly adapted to the respective installation situation. This allows for both symmetrical and asymmetrical light distributions. The NauticProfil® S2 is suitable for applications including building and facade lighting, wallwasher applications, and the targeted highlighting of architectural elements.
The slim design allows for discreet integration into modern architecture. In combination with various lenses and covers, the light distribution can be adapted to the specific application – from homogeneous area lighting to precisely directed light.
With its integrated clip mount, flexible mounting options and precise light control, the NauticProfil® S2 offers architects and lighting designers a versatile solution for linear lighting concepts in indoor and outdoor areas.
Dimensions:
End plate:
Assembly:
The NauticProfil® S2 can be screwed to the wall/ceiling or suspended using mounting accessories/clips or installed at different angles.
Please also refer to our form for NauticProfil® corner configurations. Special corner solutions for all profiles and LED inserts are available with light emission inwards, outwards, upwards and downwards.
Covers / Lenses
CR
22 x 30.4 mm
CS
(Cover Square)
22 x 29.7 mm
CS
(Cover Flat
22 x 23.8 mm
CS
(Lens 90°)
22 x 27.7 mm
CS
(Lens 60°)
22 x 29.8 mm
CS
(Lens 30°)
22 x 30.3 mm
CS
(Lens 15°)
22 x 33.7 mm
CS
(Lens Asymmetric)
22 x 33.6 mm
CS
(Cover Square Blind)
22 x 29.7 mm
CS
(Cover Flat Blind)
22 x 24.3 mm
* The height specification describes the light fixture insert with the selected cover, including NauticProfil® S2
NauticProfil® profile colors
FLASHAARNauticProfil® systems can be color-matched to any room concept thanks to individual, high-quality anodized or powder-coated finishes. In addition to the standard colors anodized aluminum (E6EV1), matte black anodized (E6C14), and traffic white powder-coated (TWP RAL 9016), further colors are available for profiles, NP lighting inserts, and end plates.
Anodized surfaces provide a very high level of protection against mechanical stress and offer excellent resistance to weathering and corrosion. Upon request, we can also supply the system components in any individual RAL and anodized color.
Our standard colors:
(E6EV1)
(E6C14)
(TWP RAL 9016)